The classification is different.
Acetate frames can be divided into two kinds, one of which is the lens using acetate fiber processing of plate cutting. The other is the injection frame. It uses acetate fiber particles. Acrylic acid is a kind of unsaturated organic acid, which can be derived from a series of compounds to form a large class of acrylic products. Acrylic acid downstream products contain common acrylate and special acrylate. It has the characteristics of heat resistance, weather resistance, aging resistance, strong adhesion, water resistance, acid and alkali resistance, stickiness resistance, and environmental friendliness.
Does it matter if the frames are broken?
If the frame is broken, there may be inconsistencies between the left and right temples. This will cause the lens optical center shift, long-term wearing will make teenagers feel dizzy and vomiting. Many people will be attributed to the high degrees of this situation. The position of the nose pads is not consistent: this kind of lens deviation from the left to the right causes the prism effect, which makes the wearer can not see clearly, blurred. When the temple is too loose or too tight, it will affect the comfort of wearing the glasses, and the excessive pressure on the temple will cause pain in the head.
What is blue light?
Our daily lives are inseparable from mobile phones, computers, tablet computers, and other electronic products. Many people's eyesight is also going downhill due to long-term exposure to strong light electronic screens, and their eyes are more or less potentially adversely affected. It is found that many optical stores sell blue light filter glasses, which have the function of blocking 99.9% UV and scattered blue light, alleviating visual fatigue. They claim that these glasses can block short-wave blue light emitted by electronic products such as mobile phones and computers, and even prevent age-related macular degeneration so they are much sought after by consumers. The price of these so-called anti-blue-light glasses varies greatly, ranging from dozens of dollars to several thousand dollars. Do these blue light blocking glasses really have so many magical functions?
The natural light seen by the human eye is composed of a spectrum of different colors, including red light, orange light, yellow light, green light, blue light, indigo light, purple light, which gives people a visual feeling of white. Different wavelengths present different colors visually, and the shorter the wavelength, the higher the energy. At present, products with electronic screens such as computers and mobile phones use LEDs and other materials to emit light mainly in three colors of red, green, and blue, and blue light accounts for the main part. Blue light belongs to the range of visible light, belongs to short waves. And the wavelength is between 400 nanometers and 500 nanometers, which is close to ultraviolet and carries a large amount of energy. And this part from 400 nanometers to 450 nanometers is called high-energy short-wave blue light.
Pure Titanium Glasses Frame Brand - Ourspop
Ourspop is a professional optometry and optometry service brand in the market. In the production of products, the company combines the principle of love of beauty and practicality, so the material selection and production of products are very strict. They not only provide professional optometry and optometry services for most eye lovers but expand the field to the international eyewear fashion industry.Nowadays, many glasses under the brand have become one of the designated brands of many institutions.
Why do glasses with the same prescription feel different?
The style of the frame has changed. The structure of the new glasses and the old glasses (half-frame, rimless, full-frame) may be different, and the angle of the glasses may also be different, which will cause visual differences and the symptoms of dizziness after wearing the new glasses. If you used to wear rimless glasses or half-rim glasses before and switch to full-frame glasses, you will feel that his field of view is limited and you will feel a little uncomfortable when you see the edge of the frame. If you wear full-frame glasses before, you will feel the edge of the lens when you change to half-rim glasses. It's too bright to adapt. There is another situation, changing from a frame with a nose pad to a frame without nose pads. Because the distance between the lens and the eye has changed, the position of the nose pad has also changed, which directly affects the relative position of the optical center and the pupil, as well as the distance from the back vertex of the lens to the cornea, which naturally affects the visual difference. In this case, you can fine-tune the nose pads, or after a short-term adaptation, you can generally return to normal.
Wear blue light glasses before bed.
Because blue light can have a huge impact on your sleep cycle, these glasses are pretty important before bed. So, putting on blue light glasses before you go to bed can help increase melatonin, which in turn helps you get a good night's sleep. Sleep glasses display a wider range of blue light, which naturally helps you sleep better and triples melatonin production. They have a slight lens color because they target a wider range of light, but are best for sleeping. In addition to sleep glasses, there are nearly transparent optical glasses that filter out blue light levels to help treat digital eye strain, which is made up of headaches, blurred vision, and eye strain.
Can you repair rimless glasses by yourself?
Splice the broken temple of the glasses into its original position on the glasses. Cut a piece of tape about 10cm long and pass it through the gap between the temple of the glasses and the base of the spring. Place the tape on the inside side of the glasses and tighten the other side with your hands. Then apply the outer tape to the temple of the glasses and press it down with your hand. Cut a piece of tape about twice the circumference of the bottom of the temple of the eyeglasses and stick it around the bottom of the temple of the eyeglasses. Cut a piece of tape about twice the circumference of the upper-middle part of the temple and use it to stick the top of the tape used in the first step. Then a piece of tape roughly twice the circumference of the middle leg of the glasses was used to tape the area between the two steps. Then repeat the previous step, and introduce another layer of tape from the gap on the outside of the adhesive tape. First, cut off a piece of tape as long as the temple of the glasses and stick the end of it to the bottom of the temple at an angle of about 60 degrees. Then tighten the other end with your hand, making it stick upward in a spiral until it covers all the tape in front.
